Product/Service

Frit-in-a-Ferrule™ Filters

Source: IDEX
Now you can filter at any point in your system where 1/16" or 1/8" OD tubing is used in a flat-bottom 1/4-28, M6 or 5/16-24 connection...

Click here to download the filters and degassers catalog extract.

  • Seals and filters simultaneously
  • Less expensive and more convenient than traditional inline filter systems
  • Available in both Flangeless and Super Flangeless™ versions

Now you can filter at any point in your system where 1/16" or 1/8" OD tubing is used in a flat-bottom 1/4-28, M6 or 5/16-24 connection.

The Upchurch Scientific® Frit-in-a-Ferrule seals and filters simultaneously by incorporating a frit into the body of a ferrule. This simple design allows you to eliminate traditional inline filters amd the associated connections in your system.

The Frit-in-a-Ferrule comes in two general designs — standard Flangeless and Super Flangeless. The ferrule body of the standard Flangeless unit is manufactured of Kel-F® (PCTFE) polymer. The ferrule body of the Super Flangeless unit is made of PEEK™ (polyetheretherketone) polymer, and the lock ring is stainless steel.

Each design is available with a built-in 0.5µm or 2µm stainless steel or biocompatible PEEK frit. The standard Flangeless version can be used with any of the standard Flangeless nuts and the Super Flangeless version must be used with our Super Flangeless nuts.

NOTE: The 1/8" Super Flangeless versions cannot be used in M6 ports (P-370, P-371, P-374 and P-375).

  • Seals and filters simultaneously
  • Less expensive and more convenient than traditional inline filter systems
  • Available in both Flangeless and Super Flangeless™ versions

Now you can filter at any point in your system where 1/16" or 1/8" OD tubing is used in a flat-bottom 1/4-28, M6 or 5/16-24 connection.

The Upchurch Scientific® Frit-in-a-Ferrule seals and filters simultaneously by incorporating a frit into the body of a ferrule. This simple design allows you to eliminate traditional inline filters amd the associated connections in your system.

The Frit-in-a-Ferrule comes in two general designs — standard Flangeless and Super Flangeless. The ferrule body of the standard Flangeless unit is manufactured of Kel-F® (PCTFE) polymer. The ferrule body of the Super Flangeless unit is made of PEEK™ (polyetheretherketone) polymer, and the lock ring is stainless steel.

Each design is available with a built-in 0.5µm or 2µm stainless steel or biocompatible PEEK frit. The standard Flangeless version can be used with any of the standard Flangeless nuts and the Super Flangeless version must be used with our Super Flangeless nuts.

NOTE: The 1/8" Super Flangeless versions cannot be used in M6 ports (P-370, P-371, P-374 and P-375).

Click here to download the filters and degassers catalog extract.